****** Configurando X-Window ******
Tenha em maos o manual do monitor e o da placa. Rode o xf86config.
Essa eh a sequencia de perguntas que o meu configurador faz:
1. Mouse. Enter a protocol number. Se voce usa um mouse "normal" de 2 butoes, escolha o
Microsoft Mouse, escolha 1 ou 2. Se vc usa um mouse PS/2 escolha PS/2 :)
Se tem Logitech de 3 butoes tente a opcao 6.
2. Do you want to enable ChordMiddle? Depende de como vc quer o comportamento do botao
do meio (se o seu mouse for de 3 botoes).
3. Do you want to enable Emulate3Buttons? Se vc nao tiver 2 butoes no seu mouse, essa
opcao emula o terceiro botao.
4. Mouse device: geralmente /dev/mouse. Depende de em que porta o mouse
estah ligado (/dev/mouse eh um symlink para /dev/ttySx).
5. Do you want to enable these bindings for the Alt keys? Eu geralmente
respondo nao.
6. hsync in kHz; monitor type with characteristic modes
1 31.5; Standard VGA, 640x480 @ 60 Hz
2 31.5 - 35.1; Super VGA, 800x600 @ 56 Hz
3 31.5, 35.5; 8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x60
4 31.5, 35.15, 35.5; Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @
5 31.5 - 37.9; Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz
6 31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz
7 31.5 - 57.0; High Frequency SVGA, 1024x768 @ 70 Hz
8 31.5 - 64.3; Monitor that can do 1280x1024 @ 60 Hz
9 31.5 - 79.0; Monitor that can do 1280x1024 @ 74 Hz
10 31.5 - 82.0; Monitor that can do 1280x1024 @ 76 Hz
11 Enter your own horizontal sync range
Pegue o manual do monitor, veja a frequencia horizontal em que ele
trabalha.
7. 1 50-70
2 50-90
3 50-100
4 40-150
5 Enter your own vertical sync range
Mesma coisa pra frequencia vertical.
8. Enter an identifier for your monitor definition:
Enter the vendor name of your monitor:
Enter the model name of your monitor:
responda qualquer coisa ou soh aperte enter. Nao vai fazer diferenca.
9. Do you want to look at the card database? Diga sim, e escolha a sua
placa de video no menu.
10.
1 The XF86_Mono server. This a monochrome server that should work
VGA-compatible card, in 640x480 (more on some SVGA chipsets).
2 The XF86_VGA16 server. This is a 16-color VGA server that should wor
any VGA-compatible card.
3 The XF86_SVGA server. This is a 256 color SVGA server that supports
a number of SVGA chipsets. It is accelerated on some Cirrus and WD
chipsets; it supports 16/32-bit color on certain Cirrus configuratio
4 The accelerated servers. These include XF86_S3, XF86_Mach32, XF86_Ma
XF86_8514, XF86_P9000, XF86_AGX, XF86_W32 and XF86_Mach64.
Which one of these screen types do you intend to run by default (1-4)?
Depende de qual placa de video vc tem. Escolha a opcao 3, q eh a mais comum, se der
problema, vc muda pra 2. Senao vc pode tentar aumentar pra 4.
11.
Please answer the following question with either 'y' or 'n'.
Do you want me to set the symbolic link?
Diga sim (isso eh pra fazer o link X com servidor q no passo 10, responda sim).
12.
How much video memory do you have on your video card:
1 256K
2 512K
3 1024K
4 2048K
5 4096K
6 Other
Essa vc consulta no seu manual da placa de video.
13.
Enter an identifier for your video card definition:
You can simply press enter here if you have a generic card, or want to
describe your card with one string.
Enter the vendor name of your video card:
Enter the model (board) name of your video card:
Responda qualquer coisa.
14.
1 Chrontel 8391 (uncertain at the time of writing) ch8391
2 ICD2061A and compatibles (ICS9161A, DCS2824) icd2061a
3 ICS2595 ics2595
4 ICS5342 (similar to SDAC, but not completely compatible) ics5342
5 S3 GenDAC (86C708) and ICS5300 (autodetected) s3gendac
6 S3 SDAC (86C716) s3_sdac
7 STG 1703 (autodetected) stg1703
8 Sierra SC11412 sc11412
9 TI 3025 (autodetected) ti3025
10 TI 3026 (autodetected) ti3026
11 IBM RGB 514 (autodetected) ibm_rgb514
12 IBM RGB 524 (autodetected) ibm_rgb524
13 IBM RGB 525 (autodetected) ibm_rgb525
14 IBM RGB 528 (autodetected) ibm_rgb528
Just press enter if you don't want a Clockchip setting.
Pressione enter.
Ok, isso deve servir pra ter a coisa funcionando, depois eh soh fazer uns
ajustes :) Se der problema em algum passo entre em contato.